1. Vertical column-free mold locking, horizontal injection molding, open on three sides of the mold, more convenient and safer operation. 2. High injection pressure, torque hydraulic motor control, large screw torque, high premolding amount, system pressure controlled by proportional valve. 3. Multi-stage pressure output, sensitive pressure response, precise and accurate. 4, can be installed single, […]
The parameters of vertical injection molding machine mainly include injection speed and injection pressure control, PVT pressure maintaining process control, buffer control, back pressure control and so on. Injection speed refers to the speed of screw advance, which will affect the injection pressure, melt flow rate and other parameters, and directly affect the quality of […]
1, install the mold on vertical injection machine A. Measuring the thickness of the mold to estimate the stroke of the ejector pin; B. Measuring the distance between the surface of the mold and the ejector plate; C. The hand-operated machine hinges to straighten and lock the mold; D. The mold adjustment device is twisted […]
1, install the mold A. Measuring the thickness of the mold to estimate the stroke of the ejector pin; B. Measuring the distance between the surface of the mold and the ejector plate; C. The hand-operated machine hinges to straighten and lock the mold; D. The mold adjustment device is twisted and adjusted to the […]
1. Wear safety protective clothing as prescribed by the workshop before production. 2. Clean up the environment around the equipment and do not store any items unrelated to production. 3. Clean the inside and outside of the workbench and equipment, and wipe the injection seat guide rail and the clamping part of the mold with […]
Before the vertical injection molding machine is working, it is necessary to debug the vertical injection molding machine to the best condition so that it can be produced more quickly and stably. So how to debug the performance of the vertical injection molding machine? (1) Check the hydraulic oil in the pressure tank of the […]
1. Check the working oil: Determine whether the vertical injection molding machine operates between the lowest and upper limits of the fuel gauge. Whether the amount of oil in the automatic oiler lubricated by the curved hand is appropriate. 2. Checking the cooling water: Make sure that there is no water leakage in the cooling […]
The characteristics and advantages of vertical injection molding machines are generally divided into ten categories. 1. The injection device and the clamping device are on the same vertical centerline, and the mold is opened and closed in the up and down direction. Its footprint is only about half of that of horizontal machines, so it […]
First, the reason: 1. The oil pump motor is installed differently. 2. The coupling is loose. 3. Internal failure of the oil pump. 4. The oil level is too low, and the air is sucked into the oil from the oil filter net or joint connection. 5. Inhale air from the motor to the moving […]
由于立式注塑机模具具有特定的精度和易损性，因此对模具进行安全保护非常重要。总结如下： 1.缺少部件：由于缺少拉杆/垫圈等零件，防止立式注塑机模具损坏。 2.防锈：防止立式注塑机因漏水/冷凝/雨水/手印而生锈。 3.除刺之外：由于布/材料冲孔/手擦/喷嘴夹/刀触，防止立式注塑机布料引起的模具毛刺。 [/ av_image] 4.抗压：防止立式注塑机的模具因保持模具而锁模。 5.防碰撞：防止立式注塑机的模具因顶针破裂而损坏，不会掉落到位。 6.欠压：由于低压保护压力过大，防止立式注塑机模具损坏。 朱丽叶 东莞泰旺机械有限公司 地址：东莞市崇口工业区天心街85号 Wedsite：www.twmachines.com 手机：86-13829232752 联系电话：86-769-81701081 电子邮件：[email protected]
Common faults and handling of injection molding machines (molding part) (1): No mode-locking: Processing method: (1): Check the safety door front stroke switch and repair it. (2): Check the 24V5A battery in the electric box Source, change insurance and power box. (3): Check if the spool is stuck and clean the valve plug. (4): Check […]
Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Aenean commodo ligula eget dolor. Aenean massa. Cum sociis natoque penatibus et magnis dis parturient montes, nascetur ridiculus mus. Donec quam felis, ultricies nec, pellentesque eu, pretium quis, sem. Nulla consequat massa quis enim. Donec pede justo, fringilla vel, aliquet nec, vulputate eget, arcu. In enim justo, […]