Under what conditions must a vertical injection molding machine be used?

1. Vertical column-free mold locking, horizontal injection molding, open on three sides of the mold, more convenient and safer operation.

2. High injection pressure, torque hydraulic motor control, large screw torque, high premolding amount, system pressure controlled by proportional valve.

3. Multi-stage pressure output, sensitive pressure response, precise and accurate.

4, can be installed single, double skateboard, rotary system, to improve production efficiency.

5. Suitable for the production of large amount of injection brain glue.

Features of vertical injection molding machine:

1. The device and the locking device are only on the same vertical Central Line, and the mold is opened and closed along the up-down direction. Its floor area is only about half that of a horizontal machine, so it is about twice as productive.

2, easy to achieve embedded molding. Because the surface of the mold is facing up, the insert is easy to put into position. The machine type of the lower plate is fixed and the upper plate is movable, and the combination of the pull-belt conveyor and the mechanical hand can easily realize the automatic molding of embedded parts.

vertical injection moulding mahcine manufacturing factory,clamping force from 15ton to 500ton,injection weight from 60g to 5000g

3. The weight of the mold is supported by the horizontal template for the up and down opening and closing actions, which will not occur the phenomenon that the mold cannot be opened or closed due to the backward motion caused by the gravity of the mold of the horizontal machine. It is conducive to maintaining the precision of machinery and molds in durability.

4, through the simple manipulator can be taken out of the plastic parts cavity, is conducive to precision molding.

5. The general clamping device is open and open, which is easy to be equipped with various automatic devices and suitable for the automatic forming of complex and delicate products.

6. The belt conveyor is easy to be installed through the middle of the mold, so as to realize automatic production.

7. It is easy to ensure the consistency of resin fluidity and mold temperature distribution in the mold.

8, equipped with rotating table, mobile table and inclined table, easy to achieve embedded molding, mold combination molding.

9, small batch pilot production, mold structure is simple and low cost, and easy to unload.

10, has undergone the test of many earthquakes, vertical machine because of the low center of gravity, relative horizontal machine better earthquake resistance.

youngstrong
Dongguan Taiwang Machinery Co.,LTD
Add:NO.127,longyan road,Chongkou Industrial district,Dongguan city,China.
Wedsite:www.twmachines.com
Mobile:86-13829239482
Tel:86-769-81701081
Email:[email protected]